can now easily control the AMD Wraith Prism RGB colouring on Linux with CM-RGB. Did you also make the connection to the CPU_FAN header? That is where the cooler gets its power for both the fan and the lights, AND where its fan speed is controlled, AND how the mobo can check that the fan actually is working (from the speed signal). Get started by downloading the Macs Fan Control app and moving it to the. 34 MB: Windows 10 64-bit: Klappt aber nicht, bei mir jedenfalls nicht, ich bekomme immer die Meldung 'Plug in your CM device to get started' Und jetzt nach 3 maligen Versuch startet das Programm gar nicht mehr, auch nicht nach einer Deinstallation und dann Neuinsatallation. I hope you did NOT also connect the other cable for Option (a). THE AMD RYZEN WRAITH PRISM RGB LIGHTING CONTROL SOFTWARE. Then you DO need to download and use the lighting control software utility. The other end of that plugs into a mobo (10-1) pin USB2 header. You use the other cable with THREE holes in one end, and plug it into the OTHER (3-pin) socket on the cooler side. (b) INSTEAD of that, if you choose, or if you have no 4-pin plain RGB mobo header (this appears to be your case, OP) you do not use that cable. If you use this method you do not need the special software for the Wraith Prism. If you have such a header, this way you can synchronize the Prism's display with your other plain RGB lights. (a) connect a cable with FOUR holes into a recessed 4-pin socket on the side of the cooler, and the other end of this goes to a mobo 4-pin (12 VDC) PLAIN RGB header IF you have one. ![]() There are two connections to make with the Wraith Prism, and one NOT to make.įirst, its female 4-pin FAN connector must plug into your mobo's CPU_FAN header.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |